Experimental investigation for machinability aspects of graphene oxide/carbon fiber reinforced polymer nanocomposites and predictive modeling using hybrid approach

This article explores the drilling behavior of polymer nanocomposites reinforced by Graphene oxide/Carbon fiber using a hybrid method of Grey theory and Principal component analysis (GR-PCA). An online digital dynamometer was employed for the evaluation of Thrust Force and Torque. The image processing technique computes the delamination. Response surface methodology (RSM) considers the parameters, namely, drilling speed (S), feed rate (F), Graphene Oxide wt.% (G) in designing the experimentation array. Principal component analysis (PCA) was used to tackle the response priority weight during the combination of multiple functions. Analysis of variance (ANOVA) scrutinized the influence of parameters and intended the regression models to predict the response. GR-PCA evaluated the optimal parametric setting and remarked that feed rate acts as the most predominant factor. The higher feed rate and wt.% of G is responsible for surface damages like fiber pull-out, fiber fracture and cracks. A significant improvement in drilling responses has been obtained and also validates through confirmatory test and microstructure investigations.     

装备表面现代维修保养技术研究

结合装备表面智能维修保养技术方面的研究成果,介绍了装甲装备故障智能检测技术、自适应、自修复功能材料,装甲装备器材全自动保养设备等先进技术,侧重装备维修保养阐述了如何提高信息化程度,推进军队武器装备维修保养技术的现代化建设。     

基于PON技术的多站雷达数字光纤传输系统设计

提出一种多站雷达体系雷达数据光纤传输系统的方案设计和实现方法。与传统雷达使用的光纤传输系统不同,而是采用技术较新的基于无源光网络PON的实时数据通信系统,这是无源光网络技术在多传感器实时通信领域的首次应用。在系统设计中利用先进的光电子和在编程技术,实现了点对多点雷达数据光纤传输,提高了信号传输质量,同时系统具有动态接入和扩容的能力。     

L波段掺铒光纤放大器增益钳制及提高特性研究

报道了一种新型980 nm激光二极管(LD)泵浦高增益的掺铒光纤放大器(EDFA).通过加入中心波长为1 550 nm光纤光栅(FBG)可以明显提高增益,并分析了增益钳制的原理.实验得到其增益比无FBG结构EDFA提高8 dB,并得到了小信号输入时增益25 dB的有效钳制.     

战时装备调配保障决策模型构建研究

分析了战时装备调配保障决策的特点,运用模糊聚类分析法对装备调配保障对象进行了分组和优先级排序,以此为基础,运用目标规划法构建了战时装备调配保障决策模型,最后,通过实例验证了模型的可行性和有效性．     

The Armoury Gauging System and Interchangeable Manufacture

Abstract

Scientifically analysing important artefacts from the site of historic battles is vital if the best information is to be retrieved from the field. A detailed knowledge of the specific equipment that was available to the combatants from a known battle is also required at a high level so that artefacts and fragments resulting from an historic battlefield archaeological survey can be recognised when found. Access to specialists from all walks of life is required throughout each battlefield-related project, from the fieldwork stages to the dissemination of information. The following paper discusses the importance of working alongside museums and specialists and gives examples of how the Towton Battlefield Archaeology Project has successfully worked with the staff at the Royal Armouries Leeds.     

内编队地球重力场测量性能数值分析

内编队系统通过实现内卫星纯引力轨道环境和内卫星精密定轨,完成高精度地球重力场测量,实现了不依赖于加速度计的重力卫星实施新途径。针对内编队重力场测量性能难以解析分析的情况,基于MATLAB并行程序设计进行了重力场测量数值模拟,获得了内编队重力场测量的有效阶数及其精度。在内编队轨道高度为300km、内卫星干扰力为1.0×10-10m/s2、外卫星定轨精度为3cm、内外卫星相对状态测量精度为1mm的条件下,计算得到内编队测量重力场的有效阶数为72,相应的大地水准面累积误差为44cm,重力异常累积误差为4.5mGal,由此可知内编队测量重力场的有效阶数主要分布在低阶部分。     

基于组合赋权雷达图实现电网电能质量综合评估

将改进的组合赋权雷达图方法用于电网电能质量综合评估。对主观、客观赋权法组合,基于组合权重与原权重之间的偏差尽可能小的优化思想,求取雷达图中各项指标的组合权值。利用各指标对应的扇形区域的对角线作为指标轴绘制雷达图,不仅最大限度体现各指标的独立权重,也反映了各指标之间的相互影响。利用雷达图的面积和周长两个变量完成对电能质量的综合评估。最后通过应用实例,验证了论文方法的合理性和在电能质量综合评估中的有效性。     

基于联合相似测度的SAR图像边缘点特征配准方法

针对SAR图像配准过程中几何变换影响特征匹配稳健性和适应性的问题,提出了一种在特征匹配过程中直接解算几何变换模型的边缘点特征配准方法。利用SAR图像边缘点的梯度和方向特征,基于像素迁移思想,定义了图像匹配的联合相似度——联合特征均方和(SSJF),并建立了SAR图像边缘点集相似性匹配准则;基于方向模板提出了改进的ROEWA算子;利用改进的遗传算法(GA)来进行相似度的全局优化搜索,获取配准模型参数;利用多幅SAR图像的配准试验,对本文方法的性能进行了验证。     

Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates

High-performance ballistic fibers, such as aramid fiber and ultra-high-molecular-weight polyethylene (UHMWPE), are commonly used in anti-ballistic structures due to their low density, high tensile strength and high specific modulus. However, their low modulus in the thickness direction and insufficient shear strength limits their application in certain ballistic structure. In contrast, carbon fiber reinforced epoxy resin matrix composites (CFRP) have the characteristics of high modulus in the thickness direction and high shear resistance. However, carbon fibers are rarely used and applied for protection purposes. A hybridization with aramid fiber reinforced epoxy resin matrix composites (AFRP) and CFRP has the potential to improve the stiffness and the ballistic property of the typical ballistic fiber composites. The hybrid effects on the flexural property and ballistic performance of the hybrid CFRP/AFRP laminates were investigated. Through conducting mechanical property tests and ballistic tests, two sets of reliable simulation parameters for AFRP and CFRP were established using LS-DYNA software, respectively. The experimental results suggested that by increasing the content of CFRP that the flexural properties of hybrid CFRP/AFRP laminates were enhanced. The ballistic tests’ results and the simulation illustrated that the specific energy absorption by the perforation method of CFRP achieved 77.7% of AFRP. When CFRP was on the striking face, the shear resistance of the laminates and the resistance force to the projectiles was promoted at the initial penetration stage. The proportion of fiber tensile failures in the AFRP layers was also enhanced with the addition of CFRP during the penetration process. These improvements resulted in the ballistic performance of hybrid CFRP/AFRP laminates was better than AFRP when the CFRP content was 20 wt% and 30 wt%.